Teacher
•
13 Messages
Does anybody know how to copy the logs from the modem ?
I am aware that we can change pages in the router logs by either the Next or Previous (or by editing the header url) but my question is this:
Does anybody know how to expediently copy the modem/router logs with a script (or minimal amount of labor)?
I would like to feed the data into a spreadsheet to be able to inspect something but the chore of copying each page in the order in which the occurrences happen is proving too time-consuming, not to mention that one of the log sections actually records in reverse order ... meaning the current event is on the last page, which can be a couple of hundred clicks ( but why?).
_xyzzy_
Expert
•
15K Messages
7 years ago
The 5268 doesn't have a "Save to file" button in the logs display? On my NVG599 it's next to the clear logs button. And if it does doesn't it save the entire log? There's no way I know of to script the router but once you got the text file you can massage it any way you want with some sort of script (e.g., a shell script could do it).
By the way what happens if you turn off IPv6?
0
0
kennyhendrick
Teacher
•
13 Messages
7 years ago
Nowhere is there the ability to save to logs. However with this new firmware that just was installed remotely I've not had the time to go through with all the new controls.....
P.S. I religiously turn off ipv6
0
0
kennyhendrick
Teacher
•
13 Messages
7 years ago
Wow....there is a LOT of new logs to go over (backdated to August LOL)
Hey xyzzy, I haven't had time to go over the new added controls in this firmware. Can you tell me if syslog to remote host will accomplish the copy of the logs?
Man you gotta see all the new controls in this now! Hello NAT
Well I've said it before and I'll say it again, at least AT&T responds promptly to our concerns! (*compared to their only other competition, the one that changed it's name **I wish I could change my name everytime I screw up LOL)
0
0
_xyzzy_
Expert
•
15K Messages
7 years ago
I think syslog is for accessing your own computer's logs. Won't do you any good here.
No save to file? Hmm, glad I don't have a 5268 then.
I'm still hung up on how you are seeing firefox mentioned in the log if you aren't running firefox. Did you check your process list to confirm it isn't being run?
While I may not be much help in diagnosing your problem - I don't know much about routers - it may be helpful to update your other post with a small section of the log (not the whole thing or too much like some posters do) you think is suspicious. I am suggesting your other thread since it's more appropriate in that thread than this thread.
0
0
kennyhendrick
Teacher
•
13 Messages
7 years ago
Well actually the 5268 previously placed here was working fine and without issue....it was the one they replaced it with that proved to be questionable right off the bat.
As for the log entries, yes it was scary to see the logs roll in three at a time about a hijack this and a hijack that (when in fact I hadn't any connection to the service provider whatsoever and irregardless of which machine I was using or which op sys).
If you are referring to the process list in the computers, it's impossible that all of our software can be tainted (especially when running from a virtual disc which is read-only...which by the way, was not our first test-use....It evolved to that when all other normal usb installs were coming up faulty).
See, the building I'm in right now is used solely for new installs for my visitors....so aside from one (primarily) machine, all those that pass through here are fresh installs (windows, linux, mac) so it's no problem for me to test as it might be for a normal end-user).
To be clear, I did not perform these tests and straightway comment here about the results. The tests were done a few days ago and I decided to investigate and pray over the matter before just plopping this on the forum).
But all in all, how spooky it was to see the router spitting out results of impossible happenings when there wasn't even an umbilical cord to the ip provider (and immediately following a reset to factory of the modem/router).
0
0
kennyhendrick
Teacher
•
13 Messages
7 years ago
info Nov 6 05:00:21
daemon: mifd[1406]: mifd_set_params failed with key: InternetGatewayDevice.DeviceInfo.X_00D09E_New5GWLANUbootRequested, value: 256
info Nov 6 05:00:21
daemon: mifd[1406]: 5G wireless device - abort QTN u-boot upgrade
info Nov 6 05:00:21
daemon: mifd[1406]: 5G wireless device - flash_image_update for QTN u-boot failed rc=256
info Nov 6 05:00:20
daemon: mifd[1406]: wifi_dev_qtn_upgrade_uboot: Wireless device start u-boot upgrade
err Nov 6 05:00:19
daemon: cwmd[1403]: CWMD fault: 9005 get params
err Nov 6 05:00:19
daemon: cwmd[1403]: mifd find params failed : Invalid param name.
info Nov 6 05:00:16
daemon: cwmd[1403]: inited ca label 'root'
info Nov 6 05:00:10
daemon: ntpd[5347]: Listening on routing socket on fd #21 for interface updates
info Nov 6 05:00:10
daemon: ntpd[5347]: peers refreshed
info Nov 6 05:00:10
daemon: ntpd[5347]: Listen normally on 4 lo ::1 UDP 123
info Nov 6 05:00:10
daemon: ntpd[5347]: Listen normally on 3 br1 107.198.169.139 UDP 123
info Nov 6 05:00:10
daemon: ntpd[5347]: Listen normally on 2 lo 127.0.0.1 UDP 123
info Nov 6 05:00:10
daemon: ntpd[5347]: Listen and drop on 1 v6wildcard :: UDP 123
info Nov 6 05:00:10
daemon: ntpd[5347]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
notice Nov 6 05:00:10
daemon: ntpd[5347]: proto: precision = 9.945 usec
notice Nov 6 05:00:10
daemon: ntpd[5347]: ntpd 4.2.6p5@1.2349 Tue Aug 15 17:01:19 UTC 2017 (1)
info Nov 5 23:31:22
daemon: rulemgrd[1483]: CMD_RET: 65280
info Nov 5 23:31:22
daemon: rulemgrd[1483]: CMD_EXEC: "/bin/ebtables ebtables -t broute -A BROUTING -p 0x886c -j DROP -i ! wl+ -o wl+"
info Nov 5 23:31:21
daemon: httpd[1440]: DNS server name: 107.198.169.139
info Nov 5 23:31:21
daemon: httpd[1440]: bind(fd=12) family 2, port 50001 to 107.198.169.139 scope 0
info Nov 5 23:31:21
daemon: timemgrd[1490]: broadband up and ntpd start
info Nov 5 23:31:21
daemon: vzonead[1505]: vzonead_config_update 1191 calls AIOCSCONFEND rc=0
info Nov 5 23:31:21
daemon: mcpd: vzonead_mini: 3245 rcv AIOCSCONFEND num=0
info Nov 5 23:31:21
daemon: vzonead[1505]: vzonead_config_update 1171 calls AIOCSPROFINFOS prof=0
info Nov 5 23:31:21
daemon: vzonead[1505]: vzonead_config_update 1141 calls AIOCSLINEUPINFOS lineuptable_empty=1
info Nov 5 23:31:21
daemon: vzonead[1505]: vzonead_config_update 1132 calls AIOCSCONFINFOS rc=0
info Nov 5 23:31:21
daemon: mcpd: vzonead_mini: 3174 rcv AIOCSCONFINFOS enb=0 msp=0 mspport=0 car=efc40001 carport=31801
info Nov 5 23:31:20
daemon: vzonead[1505]: vzonead: vzonead_cm_notify()
info Nov 5 23:31:18
daemon: lmd[1446]: ip6rd0: UP on pm_bb_if_ip6rd with 2602:300::/28 GW:::12.83.49.81
info Nov 5 23:31:18
daemon: mcpd: mcpd_vzonead_intf_change 1886 br1 WAN iface is up
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: addr 239.192.0.0 shift 14 action 1 msgsize = 56
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: if br1 enabled 1 default rule 0 count 1
err Nov 5 23:31:17
daemon: mcpd: mcpd_igmp_interface_init 185 IP_ADD_MEMBERSHIP ALL_ROUTERS err=125 addr=e0000002 ifaddr=c0a801fe
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: UP on br1 DNS1: 68.94.156.10 DNS2: 68.94.157.10
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: UP on br1 with 107.198.169.139/23 GW:107.198.168.1
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: addr 239.192.0.0 shift 14 action 1 msgsize = 56
info Nov 5 23:31:17
daemon: lmd[1446]: ipnet0: if br1 enabled 1 default rule 0 count 1
info Nov 5 23:31:17
daemon: vzonead[1505]: vzonead_config_update 1191 calls AIOCSCONFEND rc=0
info Nov 5 23:31:17
daemon: mcpd: vzonead_mini: 3245 rcv AIOCSCONFEND num=0
info Nov 5 23:31:17
daemon: vzonead[1505]: vzonead_config_update 1171 calls AIOCSPROFINFOS prof=0
info Nov 5 23:31:17
daemon: vzonead[1505]: vzonead_config_update 1141 calls AIOCSLINEUPINFOS lineuptable_empty=1
info Nov 5 23:31:17
daemon: vzonead[1505]: vzonead_config_update 1132 calls AIOCSCONFINFOS rc=0
info Nov 5 23:31:17
daemon: mcpd: vzonead_mini: 3174 rcv AIOCSCONFINFOS enb=0 msp=0 mspport=0 car=efc40001 carport=31801
info Nov 5 23:31:17
daemon: vzonead[1505]: vzonead: vzonead_cm_notify()
info Nov 5 23:31:12
daemon: lmd[1446]: dsl0: Country: {FFB5} Vendor: {CXSY} Specific: {354}
info Nov 5 23:31:12
daemon: lmd[1446]: dsl0: Line1 Margin:18.6/0.0 Atten:17.1/0.0 Power:14.2/-7.6
info Nov 5 23:31:12
daemon: lmd[1446]: dsl0: Line0 Margin:17.8/0.0 Atten:17.6/0.0 Power:14.2/-7.7
info Nov 5 23:31:12
daemon: lmd[1446]: dsl0: up in bonded mode with 2 lines G.993.2_8d interleaved Rate:60248/10366 Max:108107/10366
info Nov 5 23:31:11
daemon: dsld[1423]: dsl_bg_remove_task: removed task QLN_AVG, arg: 0x00450D20
info Nov 5 23:30:55
daemon: dsld[1423]: dsl_bg_remove_task: removed task QLN_AVG, arg: 0x00441228
info Nov 5 23:30:50
daemon: dsld[1423]: dsl_bg_add
info Nov 5 23:30:50
daemon: dsld[1423]: Line 1: Upstream PTM pre-emption is NOT CONFIGURED for this SHOWTIME
info Nov 5 23:30:50
daemon: dsld[1423]: bcmdsl_get_tpstc_mode: line: 1, PTM pre-emption status(DS/US): DSLAM: 0/0, CPE: 0/0, disable:0, Bonded: 1
err Nov 5 23:30:43
daemon: lmd[1446]: eapol0: unable to set default dscp 'CS0'
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --createnetdev 1.1 ptm0") = 0 executed in 0.2695 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 7 wfq 10 768 768 0") = 0 executed in 0.0255 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 6 wfq 10 0 128 16000") = 0 executed in 0.0269 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_configure_ptm_tx_queues: skipping xtmctl config for QOS q_id=6
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 5 wfq 10 0 128 16000") = 0 executed in 0.0270 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 4 wfq 10 0 256 16000") = 0 executed in 0.0268 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 3 wfq 30 0 800000 16000") = 0 executed in 0.0260 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 2 wfq 10 0 256 16000") = 0 executed in 0.0259 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 1 wfq 10 0 256 16000") = 0 executed in 0.0259 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --addq 1.1 0 wfq 10 0 13400 16000") = 0 executed in 0.0260 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_exec("xtmctl operate conn --add 1.1") = 0 executed in 0.0001 secs, syscmd status: 0 (Success)
info Nov 5 23:30:42
daemon: dsld[1423]: dsld_configure_ptm_tx_queues: 9 entries in queue table, ptm_pre_emption: 0
0
0
high-speed
Teacher
•
15 Messages
6 years ago
There's no command to save all of the logs all at once but here's what I do:
1) My modem/router is at 192.168.1.254 which I believe is the default. You will need to adjust the address if your router is not there.
2) Go to http://192.168.1.254/xslt?PAGE=C_4_0 and copy/paste the log into notepad
3) Go to http://192.168.1.254/xslt?PAGE=C_4_1&OFFSET=0&COUNT=10000 and copy/paste the log into notepad. The COUNT=10000 part is the key as it display 10,000 lines of the log meaning you should be seeing the entire thing.
4) I use Notepad++. If you don't use Notepad++ then you are on your own. I use the following regular expressions as search/replace with the replace part indented
^(INF) \tP?([02]0[0-9][0-9]-[0-9][0-9]-[0-9][0-9]T[0-9][0-9]:[0-9][0-9]:[0-9][0-9])(-[012][0-9]:00)? \t(acs|sys) \t\r\n\r\n(.+)\r\n$
\1\t\t\2\t\4\t\t\5
^(INF) \tP?([02]0[0-9][0-9]-[0-9][0-9]-[0-9][0-9]T[0-9][0-9]:[0-9][0-9]:[0-9][0-9])(-[012][0-9]:00)? \t(hurl) \t\r\n\r\n(.+)\r\n$
\1\t\t\2\t\4\t\5
^(INF) \tP?([02]0[0-9][0-9]-[0-9][0-9]-[0-9][0-9]T[0-9][0-9]:[0-9][0-9]:[0-9][0-9])(-[012][0-9]:00)? \t()\t\r\n\r\n(Previous log entry repeated [0-9]+ times)\r\n$
\1\t\t\2\t\4\t\t\5
^(info|warn|notice) \t([a-z]{3} [0-9]+ [012][0-9]:[0-5][0-9]:[0-5][0-9]) \t\r\n\r\n((daemon|syslog|user):.+)\r\n$
\1\t\2\t\3
^(err) \t([a-z]{3} [0-9]+ [012][0-9]:[0-5][0-9]:[0-5][0-9]) \t\r\n\r\n((daemon|syslog|user):.+)\r\n$
\1\t\t\2\t\3
The reason for the three separate INF lines is to get the tabs to line up in Notepad++
If you want to save the upgrade log the URL is http://192.168.1.254/xslt?PAGE=C_4_2
Calling it the upgrade log seems to be a lie. It shows only the current version number and not upgrades. I'm here today as someone (I hope AT&T) upgraded my modem firmware without warning. It caused a loss of connection for about ten minutes but also blew out my SSID! Fortunately, I had done save-pages from all of the setup pages a while back and found this page because I Googled for a weird item that showed up in the log file and apparently was the command that was remotely executed on my box to upgrade it.
The first line below is someone logging into my box as root and the second is them starting the upgrade
info May 23 14:00:15 daemon: cwmd[2298]: inited ca label 'root'
info May 23 14:00:16 daemon: rulemgrd[2390]: CMD_EXEC: "/bin/ebtables -t filter -I F_MCAST 1 -p ipv4 --ip-src 1.1.1.0/24 --ip-dst 239.255.255.250 -j DROP"
Normally I don't bother with saving the firewall log log as it's noise from a billion i-d-i-o-t-s on the Internet trying and failing to break in.
The firewall can be saved using http://192.168.1.254/xslt?PAGE=C_4_3&OFFSET=0&COUNT=10000
The search/replace is
^(notice) \t([a-z]+ [0-9]+ [012][0-9]:[0-5][0-9]:[0-5][0-9]) \t\r\n\r\n(.+)\r\n$
\1\t\t\2\t\3
Another option is to use the URLs I've given and to save the web pages as HTML.
0
0