Teacher
•
8 Messages
Uverse remote code for TCL Roku TV
Looking for the Uverse remote control code for a TCL "Roku" TV (model 32S4010R). Any help would be appreciated...
Teacher
•
8 Messages
Looking for the Uverse remote control code for a TCL "Roku" TV (model 32S4010R). Any help would be appreciated...
Accepted Solution
Official Solution
mibrnsurg
Expert
•
20.4K Messages
9 years ago
Only Uverse remote that has TCL codes is the S-20, since it's so new to US market from China.
http://www.att.com/media/att/2014/support/pdf/S-20_U-verse_remote_user_guide.pdf
😉
Chris
__________________________________________________________
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more
0
0
rfk1381
Teacher
•
8 Messages
9 years ago
when Uverse was installed in December. Guess eventually we may upgrade to
the newer S20 remote to control our TCL tv's. .Ron
0
0
Ghagaman
Contributor
•
2 Messages
9 years ago
I was able to get my S10 remote to work with my TCL television for the first 6 months we had it. It stopped working last week, and now I can't find the code. I know it can be done because it worked for 6 months!
0
0
Ghagaman
Contributor
•
2 Messages
9 years ago
Ok, so I went to the manual instructions and had to push the ff/scan button about 137 times, but then my TV turned off and my S10-4 remote words with my TCL TV again.
0
0
Tecttalk01
Contributor
•
1 Message
9 years ago
Setup using Manual Programming
Direct code entry is an optional method to program your TV or Audio device.
Be sure that the device is powered-on and you can hear live audio before you start
STEP 1
Enter Program Mode - Press and hold the OK and MENU keys simultaneously for three seconds until the POWER key flashes red twice to confirm you are in program mode.
STEP 2:
Enter the coda for your brand- TCL ROKU TV (model 32S4010R)
Enter code l1756. The POWER key will flash red twice. Note: If you press any other button or enter a wrong code, this will result in a long red blink of the Power button and will exit programming mode without saving ony changes.
STEPS:
Test the code - Test the POWER and VOLUME keys to see if they control your TV or Audio device as expected.
0
0
Greenb478
Contributor
•
1 Message
8 years ago
I have entered the code correctly. The light flashes twice. Does not control the tv.
0
0
aviewer
Expert
•
10.1K Messages
8 years ago
@Greenb478 - Use the search or scan method. Instructions here - http://www.att.com/esupport/u-verse/remotes/
0
0
iparra5223
Contributor
•
3 Messages
7 years ago
I have the ATT Uverse S20-S1A remote tried TV TCL code 12434 and still can’t get it to work with TCL ROKU TV (model 32S4010R) tried multiple times, tried auto search still nothing
0
0
iparra5223
Contributor
•
3 Messages
7 years ago
I have the ATT Uverse S20-S1A remote tried TV TCL code 12434 and still can’t get it to work with TCL ROKU TV (model 32S4010R) tried multiple times, tried auto search still nothing
0
0
iparra5223
Contributor
•
3 Messages
7 years ago
For the code brand- TCL ROKU TV (model 32S4010R) is the code 1756 or 11756?
0
0