Gaming on a Hotspot Open NAT Type - How to Open UPnP If you are here, you are wondering how to open the NAT (network address translation) on your Hotspot. Unfortunately, most mobile Hotspots do not have the ability to open the NAT due to software limitations.   Not to worry, we have a sol

Hello, does anyone know how to help with this? I have the 3801HGV AT&T Router, and I'm trying to connect two XBOXes.  Each XBOX is a Cat-5 Lan Connection that goes directly into the back of the Router.  When I connect them to Xbox Live, one of them has no issues, and the other one

I have a MIFI Liberate 4G LTE and have been using it with a PS3 for online gaming. It works very well, however the NAT is set to STRICT. Is there anyway to have this changed off of Strict?

I have AT&T U-Verse with an ARRIS NVG589 and I know I need to go to the router IP address then Firewall-> NAT/Gaming and add PSN & PS4 IP to the device list. My concern is that it pops up the warning "The change you are attempting to make may cause AT&T U-verse TV to stop working properly." My conce

This is old, I know, but I just can't figure out how to open my PS3 NAT type. Current NAT type is: Moderate

I want to change my NAT Type on Xbox One, it is on strict. I also dont know my system password and where to find it.

Trying to figure out how to change the NAT settings so that my family and I can play online games. From what I understand I need to set up port forwarding however the instructions on how to do this seem to be outdated? I am using this post for reference:https://www.att.com/esupport/article.html#!/u-

Learn how to set up your own router The Arris BGW210-700 BGW320 is an advanced residential gateway that supports VoIP, IPv6, video delivery, security firewall, and extensive remote management features.    The BGW210-700 Broadband Gateway delivers robust video, primary line telephony, and

I have AT&T Wi-Fi gateway, model #5268AC. A complete stranger visiting my house signs onto my AT&T wi-fi network for internet access.  I'm on my laptop searching for a door at Home Depot.  10 minutes later, the stranger begins seeing ads on their phone in their browser for that specific door at Home

Note to anyone trying to fix NAT settings for Fixed Wireless: It Can't Be Done. This answer comes from deep diving and long phone calls, transferring me to one branch to another to main headquarters. The problem that Fixed wireless has is that it is a cell type dialer and they restrict anything bein

Hello everyone! I hope somebody can help me on this.  I'm trying to get an open NAT on my Xbox One.  I'd settle for a moderate NAT at this point.  I've tried opening my ports, putting the console in the DMZ. When I assign a static ip on the console and view it on the Unite Pro set up page, it shows

I'm trying to enable port forwarding (in this case port 3640) for a device on my network, but in the "firewall" "nat/gaming" settings in the gateway config, my device does not show up under "Needed by device". The device does correctly show up in the "Device List" and it otherwise functions correctl

Here goes;My NAt type is strict, the pace 5268ac does not allow me to access pinholes and dmz settings. UNLESS, i factory reset it and unplug the internet in ethernet cable. Upon doing the factory reset with data cable unplugged i can access all the options the pace 5268ac should have. I did this an

I just went through living H3LL trying to get my NVG589 w/ Gigapower to connect to my ASUS RT-N66U router. A little background - I was doing port mapping for 443 through the 589 until I added a wireless DVR and the access point took over port 443.  This has been somewhat well documented on the forum

So I have the uverse internet packaged with TV400.We have the 18-22mgps internet.We were not informed what UVERSE actually was and when they installed their equipment was told that NO!!! you cannot use your fancy new router you bought to maximize speed and minimize connection issues. There are three

Hello, all. A few months back I purchased a unlimited data plan with at&t along with a model MR1100 – Nighthawk M1 hotspot in order to game on the Xbox One with it. So, I get on Xbox to find that I have a Strict NAT. I know many here would automatically point me towards a beginners guide

I have a 2wire 2701hg-b built in wifi I tried opening ports but I don't think im doing it right. Also sometimes the nat type will be open but later will turn back to moderate. any help would be great.

I am trying to set up Back to My Mac and have read the forums about NAT and UPnP being unavailable on the AT&T router.  Does AT&T offer another way to open the router for access to my Macs on my network?  What is the work around?  Thanks

I recently got ATT Gigabit connection and my NAT type has switched to strict. How can I get it back to OPEN my computer?Edit : I have a BGW210-700

After posting, I realized that this is the wrong place for this question. I created a new post in the "Fiber Equipment" forum. https://forums.att.com/t5/AT-T-Fiber-Equipment/GigaPower-Has-anyone-had-success-getting-AT-amp-T-to-give-them/m-p/5295844#M3809