I was looking into getting a Wi-Fi extender and wasn't sure if it would be a good idea to get a dual band Wi-Fi extender or just a normal 2.4ghz. I might just get a dual band extender anyway in case something upgrades later down the road. But being everything runs on Wi-Fi now and some things are cl

I have looked up this up in bunch of posts but could not find an answer to it. I have smart bulb that I want to configure and the app for that bulb works only on 2.4 GHz frequency. My iPhone is supposedly connected to 5 GHz range. I want to get it on 2.4 GHz but I cannot find that option anywhere in

Hi, I am presently stuck with the Motorola NVG router which does not support 5GHz wireless, 1 Gbps ethernet, 802.11ac, or (and probably the one thing you can't work around) configurable QoS- stadnard features for modern wireless routers. I was wondering if it was possible to replace my current modem

Had this NVG599 for about a month It replaced an older ATT router.. I was using the default setup where both the 2.4 and the 5.0 Ghz were the same, so it was automatically providing 5.0Ghz to my FireStick and 2 other 5Ghz devices. At one point. I changed the default setup by changing one of the SSID

Hello! I have AT&T Fiber 100 and a dual band Pace PLC modem/router. My Fire TV won't stay connected at 5GHz. If I go in to the modem/router home page and rescan the 5GHz channel selection, my Fire TV will pick up a 5GHz connection for a bit, but then it drops back down to 2.4GHz. Is there a problem

I have a lot of 2.4Ghz intererence in my building and it really impedes traffic on my LAN for things like backups to TimeMachine or other data intensive tasks over the air on my LAN. I get a measly 20Mbps download from the Arris but I would like to have high speed traffic within my LAN. I have once

i added the Asus RT-AC87U to the router in ap mode for better wifi and 5ghz i turned off the wireless on the NVG589 .  it works fine but then will drop the connection what seems like every hour on the hour .

I recently had two ssid one with 2.4ghz and the other with 5ghz on the NVG599 but then the 5Ghz was disabled two days later.

When I don't have band shaping on, my wifi connection is stable using either 5ghz or 2.4ghz.  However, when I turn Band Steering on, either my device will randomly disconnect and then reconnect to wifi or the internet will stop working on the device, and I will have to disconnect and reconnect to wi

I don't see any way to set up 5GHz WiFi access through the subject RG. The WiFi settings page shows only 2.4 GHz radio.  Attached is screenshot of setup page;   Is there a place in setup somewhere where 5GHz has to be enabled?  

I have a 5268AC modem/router. I have a Chromecast 2 set up, and primarily use it from my phone (HTC One M8) to control it. My phone connects automatically to the 5GHz spectrum, and when it's there, it can't see or talk to my chromecast. When I force the phone into 2.4GHz mode, it works just fine, bu

So, I've been having a great deal of trouble with line 2 of my bonded pair.  Five or six techs later, they switched me to a single wire.  I have been paying for 50 MGBS service and now discover that many of my devices don't have the proper wireless card to get 50 MGBS.  So now I have a 2.4 ghz and a

We just got fiber and they installed a new 5268 because of problems we were having with the 5GHZ network disappearing.   Everything has been great for 6 days.   Today I went to use my Fire stick and it could not connect to 5GHZ.   Since the stick was new, I assumed it must be something in the stick.

Hello,I am managing several RF devices at my house and need careful spectrum coordination.  I also noticed that the VEN401 AP would broadcast at noticeably lower power levels when in channels near the edge of 5GHZ spectrum (like 36).  Just enough to impact my wireless receiver service a few times a

Recently, within the last week or so, my Arris BGW210-700 WiFi radios keep dropping.  This disconnects my 2.4ghz  and 5ghz WiFi devices.  To resolve I login to the router with a wired connection and restart both radios.  The WiFi signals were working fine for about a month (new install), no issues. 

Does anyone have a setup where you are using your own dual band 802.11 AC router and also have the ATT Cisco Wireless Access Point for the the Uverse wireless receivers? If yes, have you experienced any issues with the 5Ghz Wifi signal from the router? I am having some issues with 5 Ghz signal only

I am having an issue that I have tried to report to the ATT tech support team but I am not able to get any help.  (I have an NVG599 being shipped but I wanted to report this issue just because the Pace has better specs)   This is my problem.  When I enable the 2.4ghz wifi on the modem, I get a brief