Nobody from AT&T can seem to answer this so I turn to you knowledgeable folks!In short, my Uverse internet and cable service is set to be installed on Saturday 6/22. The question that nobody from AT&T can't seem to answer is how I would set up my network with their hardware. I do a lot of intra-netw

Hello, does anyone know how to help with this? I have the 3801HGV AT&T Router, and I'm trying to connect two XBOXes.  Each XBOX is a Cat-5 Lan Connection that goes directly into the back of the Router.  When I connect them to Xbox Live, one of them has no issues, and the other one

I was forced to get a NVG599 router after using 2wire 946 before.  Since  then my slingbox will not work.  Att wants to charge me $15 extra a month in order to open a port so I can use it.  I don't think it is right since before changing modems everthing worked fine.  I also didn't have to rent a mo

People say it's a lot like the 2Wire 3600, but the menus don't look the same to me. I Happily follow instructions with screenshots. My local tech geek is not able to handle this for some reason... Help?

Hello! I've got Uverse TV service (via a 3800GHV-B router), and I'm thinking about adding UVerse Internet Service too.  However, I am worried.  I need to keep my current router, a Linksys, due to a highly specialized network setup that the 3800 cannot manage.  From what I am reading, I would need to

So I have a Netgear lb1120 modem. And the sim card I have installed is linked to a buy a session. However I want the to have the port fowarding option available. Because for example my nintendo switch has a NAT rating of D, and my xbox one says double NAT. Even if I set the modem for a DMZ to be the

It's been what, 4 years now for uVerse? 802.11N is now a fully ratified standard, and has been for years. Most every laptop, tablet, and cellphone is now shipping with built in 802.11N support. 802.11AC draft gear should start shipping this fall! I think most of us are sick and tired of having to pu

I have a U-Verse NVG589 modem/wireless router.  I want to put an HTTP server on my DMZ so it is accessable from the internet.  What setting need to be made in the firewall?  I had this working at my last address but unfortunately, I had to change modems and can't find the instructions I used to make

... on Pace gateway? Will the TP-Link AC2300 router's firewall provide sufficient protection since it will now have a public ip? In this configuration, if I turn RG's wireless off, will the only way to access settings then be by directly connecting a pc via ethernet? Can I setup an additional router

UVerse Internet DOES NOT allow you to access your home security cameras from outside your home. It is NOT FREE with AT&T internet service. I played around with AT&T UVerse Router for a few weeks to forward my Security IP cameras' Port number so that I could watch my cameras from work but at the end

Hello, all. A few months back I purchased a unlimited data plan with at&t along with a model MR1100 – Nighthawk M1 hotspot in order to game on the Xbox One with it. So, I get on Xbox to find that I have a Strict NAT. I know many here would automatically point me towards a beginners guide

Until 2 weeks ago I had 2 Xbox Ones connected to WRT54GS running Tomato 1.28 via Bridge mode from an NVG589 AT&T gateway. Everything was working fine until it wasn't. I called support and they said my router was broke and they would send me replacement asap. So 3 days no gaming. The replacement rout

I'm trying to get my gateway configured for using my QNAP NAS unit remotely.  There are 4 or 5 different ports listed for services such as SSL, HTTPS, FTP, etc.  I know to go to the 'firewall' section to open the ports. My questions is about combining the needs in one 'user-defined application'.  Is

After posting, I realized that this is the wrong place for this question. I created a new post in the "Fiber Equipment" forum. https://forums.att.com/t5/AT-T-Fiber-Equipment/GigaPower-Has-anyone-had-success-getting-AT-amp-T-to-give-them/m-p/5295844#M3809

     Streaming Issues? Connect your computer Connect other devices to your Wi-Fi Network Connect your 3rd party devices Find your Wi-Fi Information How to Change your Wi-Fi Password and Network Name (SSID) on NVG How to Change your Wi-Fi Password and Network Name (SSI

I had AT&T Fiber installed last week and have been having slow speeds. I'm using a Linksys EA9300 in DMZ Plus mode behind the RG (Pace 5268AC) and turned off IPV6 on the Gateway. On a 5GHZ network from the Linksys, I am only getting around 75-80 Mbps. If I connect to the AT&T Wifi on 5GHZ, I get 300

I have fiber on the Pace 5268AC FXN and I connected my cisco rv325 router and put it in the DMZ+ on the Pace modem (since you can't bridge directly).  My cisco is showing the external ip on the wan port.  My problem is that I can ping the external address from outside and I want that to be blocked.

Before I purchased my ATT Home Base (ZTE Z700A), I had confirmed with multiple AT&T employees that it would do what I would like to do:I would like to enable in-bound connectivity & NAT for Remote Desktop (using either TCP/UDP 3389), HTTP, FTP, and a few other ports for various services. The options

Hello, After reading all of the recent comments related to port forwarding issue on this appliance(5268AC), I still don’t seem to understand if there is any solution. Can someone clarify if there is any way to make the ‘pinhole’ concept work to avoid using the DMZ/Bridge to personal router as worka

My account has a block of 8 static IPs, 5 useable. If I set one LAN-connected device (e.g. a third-party router) to DMZ+ mode, will it receive all my static IP's traffic? I plan on assigning the router's WAN IP to one of my useable static IPs. Will that work? (I tried using "cascaded router" mode wi